HHD pitches custom insertion thermal flowmeters for large pipe airflow audits
HHD is promoting custom insertion thermal gas mass flowmeters for industrial airflow audits in large compressed-air and ventilation networks. The company says the approach lowers installation disruption and helps plant teams identify leaks, verify compressor performance and cut energy waste.
Why it matters: - Large industrial plants spend heavily on compressed air, which can take up a major share of electricity costs. - Airflow audits in large-diameter pipes can expose leaks, inefficiencies and pressure losses that drive up operating expenses. - Insertion thermal flowmeters are positioned as a lower-cost alternative to full-bore inline meters for pipes above 200 millimeters.
What happened: - HHD, officially Huaibei Huadian Automation Technology Co., Ltd, outlined its custom insertion thermal gas mass flowmeter approach for industrial airflow audits. - The company says the meters are designed for large compressed-air mains and ventilation ducts. - HHD directs readers to more technical specifications and enterprise solutions.
The details: - Traditional inline flow meters can require pipe cutting, heavy flanges and major structural changes. - Insertion-style meters use a slim sensor probe mounted on a customizable support rod that extends into the process stream. - HHD says the design keeps hardware costs from rising with pipe diameter. - Technicians can install insertion probes with hot-tap ball valve assemblies while the line stays pressurized. - The installation process includes drilling a small hole, welding a threadlet coupling, attaching an isolation valve and extending the probe to the correct depth. - The approach avoids pipe cutting, depressurization and production stoppages. - The probe adds little obstruction and does not create a permanent pressure drop. - Insertion probes measure gas velocity at a single point, so placement affects accuracy. - Gas velocity in a pipe is not uniform, with slower flow near the wall and faster flow near the center. - HHD says the average velocity point is typically about 25% of the internal diameter from the pipe wall, or roughly 12% past the centerline under specific Reynolds numbers. - Elbows, reducers, tees and valves can distort flow profiles and create swirl and turbulence. - Engineers can manage those distortions by choosing long straight runs or using flow straighteners and electronic profile correction factors. - HHD says its probes use high-grade stainless steel and platinum resistance temperature detectors. - One RTD measures ambient gas temperature while a heated RTD maintains a constant temperature difference. - The thermal dispersion method measures mass flow by tracking how moving gas carries heat away from the sensor. - HHD says the meters do not require auxiliary pressure sensors or temperature transmitters. - The company offers custom probe lengths for different pipe diameters and duct layouts. - HHD also offers adjustable compression fittings, hot-tap ball valve assemblies and rugged terminal housings for vibration, moisture and outdoor use. - Digital signal processing transmitters convert sensor readings into standard output signals for building management systems and enterprise data historians.
Between the lines: - The pitch is aimed at plants that want visibility into compressed-air losses without shutting down production lines. - The business case depends on reducing both installation cost and the downtime tied to traditional inline metering. - The technical emphasis on insertion depth, straight-run requirements and profile correction shows that accuracy still depends heavily on field engineering. - HHD is also framing the product as part of a broader energy-efficiency strategy, not just a measurement tool.
What's next: - HHD says its team works with plant energy managers, consulting engineers and system integrators before meter selection. - Site reviews focus on pipe geometry, line pressure, gas temperature and velocity profiles. - The company says accurate mass flow data can help teams isolate baseline leaks, evaluate compressor efficiency and balance air delivery across departments. - HHD expects the combination of tailored instrumentation and support to help industrial customers cut utility power use over time.
The bottom line: - For large industrial air systems, HHD is betting that insertion thermal mass flowmeters can deliver audit-grade data with less disruption than inline meters.
Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.
Sign up for:
Power Generation Journal
The daily local news briefing you can trust. Every day. Subscribe now.
Check Your Email!
We sent a one-time activation link to: .
Confirm it's you by clicking the email link.
If the email is not in your inbox, check spam or try again.
Welcome back!
is already signed up. Check your inbox for updates.